Power Distribution for Events, Stages and Temporary Installations
Event power systems often need to supply lighting, audio equipment, LED screens, catering equipment, temporary structures, production equipment, and other electrical loads from the same power source.
It divides the incoming electrical supply into multiple protected outgoing circuits. Depending on the configuration, the unit can accept single-phase or three-phase power and provide combinations of industrial plugs, sockets, cable outlets, breakers, RCD/RCBO protection, meters, or other electrical components.
This allows event contractors and rental companies to build a temporary distribution network without installing a permanent electrical distribution system.
Available Current Ratings
They can be configured for different power requirements, from small portable units to high-current main distribution equipment.
Typical current ratings include:
32A Event Distro Box
63A Event Distro Box
125A Event Distro Box
250A Event Distro Box
400A Event Distro Box
630A Event Distro Box
800A Event Distro Box
The required rating depends on the available incoming supply and the total connected load. For example, a 400A distro box may be used as a main distribution point for larger event power systems, while smaller 32A or 63A units can be positioned closer to individual equipment groups.
Technical Specifications
| Specification Item | Details / Standard Configuration |
|---|---|
| Product Type | Concert & Stage Power Distribution Unit (Distro) |
| Frame Material | High-Grade Stainless Steel / Anodized Aluminum |
| Enclosure Material | Heavy-Duty Flame-Retardant Polyethylene / Polyurethane |
| Input Connection | Single-Pole High-Current Connectors / 63A/125A CEE Inlet |
| Output Outlets | 16A/32A 3-Pin / 5-Pin CEE Sockets, Aux Outlets |
| Protection Grade | IP44 / IP65 (Customizable) |
| Safety Features | Individual MCB/RCD Overload & Short-Circuit Protection |
| Mounting / Transport | Floor Standing, Stackable Frame, Forklift Slots |
| Applications | Concerts, Stadium Tours, Festivals, Film Sets, Outdoor Broadcasts |
Configured for Different Event Power Requirements
The internal electrical configuration can be specified according to the application rather than using one fixed output arrangement.
Typical configurations include:
High-current three-phase input
Multiple single-phase outputs
Three-phase outputs
IEC 60309 industrial plugs and sockets
MCB circuit breakers
RCD or RCBO protection
Emergency stop devices
Voltage and current meters
Individual circuit protection
Custom cable entry and outlet arrangements
The number, type, and rating of outlets can be matched to the equipment that will be connected at the event site.
Built for Temporary and Mobile Power Distribution
Event power equipment is frequently transported between venues and installed under changing site conditions. The enclosure therefore needs to withstand repeated handling, cable connection, movement, and outdoor use.
Depending on the model, Event Distro Boxes can be supplied in portable, mobile, stackable, wall-mounted, or combination configurations.
Enclosure materials can include thermoplastic, HDPE, rubber, or stainless steel, depending on the required mechanical strength, weight, weather resistance, corrosion resistance, and installation environment.
For outdoor events, enclosure and component selection can also be specified according to the required IP protection level and environmental conditions.
Event Distro Box for Concerts and Festivals
Concerts and festivals commonly require several levels of temporary power distribution.
A typical system may use a high-current main distro to receive power from a generator or site supply, followed by smaller distribution units positioned near the stage, lighting equipment, audio equipment, LED screens, catering areas, or temporary structures.
This distributed arrangement reduces the need to run every load back to one central point and allows different equipment groups to receive appropriately protected circuits.
Typical applications include:
Concerts
Music festivals
Outdoor festivals
Stage productions
Live performances
Touring events
Exhibition halls
Trade shows
Sports events
Film and TV production
Temporary entertainment venues
Event rental applications
Protection and Electrical Configuration
Protection requirements depend on the local electrical system, connected equipment, and applicable regulations.
It can be configured with circuit breakers and residual-current protection to provide individual protection for outgoing circuits. The distribution arrangement can separate different loads so that a fault on one circuit does not necessarily interrupt every connected load.
For projects with specific electrical requirements, the incoming supply, output circuits, breaker ratings, socket types, protection devices, cable specifications, and enclosure rating should be confirmed before production.
Equipment can be designed around applicable standards such as IEC 60309 for industrial plugs and sockets and IEC 61439 requirements where applicable to the distribution assembly.
Why Choose Our Stage Power Distro Units?
1. Superior Circuit Safety on Stage
In live performances, power stability is non-negotiable. Our power boxes feature dedicated circuit breakers for each group of outputs, preventing localized trip-outs from downing the entire stage setup.
2. Touring-Ready Durability
The surrounding stainless steel frame absorbs impacts during loading and unloading, protecting critical socket assemblies and internal wiring from structural damage.
3. OEM & Custom B2B Manufacturing
We support complete custom configurations:
- Custom socket types (US, EU, UK, or Industrial CEE standards)
- Custom circuit breaker brands (ABB, Schneider, Siemens)
- Custom panel branding, colors, and laser-engraved labeling
FAQ
1.Can an Event Distro Box be used outdoors?
Yes. Outdoor Event Distro Boxes can be supplied with suitable enclosure materials and IP protection ratings for the installation environment. The required IP rating should be selected according to exposure to rain, dust, moisture, and other site conditions.
2.What output sockets can be installed on an Event Distro Box?
The output configuration can include different industrial plugs and sockets, including IEC 60309 configurations, as well as other specified outlet types. Output current ratings and quantities can be customized according to the connected equipment.
3. Can you manufacture a custom Distro Box?
Yes. Custom configurations can be manufactured according to the required input, output, current rating, voltage, protection devices, enclosure material, IP rating, metering, cable entry, and installation method. Drawings, electrical diagrams, outlet lists, or existing samples can be used for configuration review.
4.Can an Distro Box include RCD or RCBO protection?
Yes. RCD, RCBO, MCB, and other protection devices can be incorporated according to the electrical configuration and applicable requirements. Individual outgoing circuits can also be separately protected.
5.What is the difference between an Distro Box and a standard Distribution Box?
It is specifically configured for temporary and mobile power distribution. It typically places greater emphasis on high-current inputs, multiple outlet configurations, portability, quick cable connection, circuit protection, and repeated transportation between event locations.
Hot Tags: event distro box, China event distro box manufacturers, suppliers, factory, event distribution boards, event power distribution box, Event Power Distro, power distribution box for live sound, temporary event power distribution
