Designed for Exhibition Booth Power
An exhibition booth may only require a relatively small amount of electrical power, but the power needs are often distributed across several locations.
For example:
The distribution box provides a central connection point and allows different electrical loads to be connected through separate output circuits.
This arrangement is particularly useful for exhibition contractors and booth builders who need to install and remove temporary electrical systems repeatedly.
Typical Exhibition Applications
APEKS Exhibition Power Distribution Boxes can be used for different temporary exhibition environments, including:
The required configuration can vary significantly depending on the booth size, electrical supply and equipment being used.
Powering Multiple Booth Equipment
A typical exhibition booth may have several relatively low-power electrical loads.
LED Exhibition Lighting
Provides power distribution for booth lighting, spotlights, display lighting and decorative lighting.
Display Screens
Suitable for connecting monitors, LED displays, digital signage and presentation equipment where the required electrical capacity is within the distribution system rating.
Computers and Office Equipment
Power can be distributed to laptops, desktop computers, printers, charging stations and other booth equipment.
Audio Equipment
Small speakers, mixers and other temporary audio equipment can be connected through dedicated output circuits where appropriate.
Product Demonstration Equipment
Some exhibitors use electrical equipment to demonstrate products at the booth. The distribution box can provide dedicated outlets for these loads according to their electrical requirements.
Compact Design for Limited Booth Space
Exhibition booths often have limited space for electrical equipment. A large fixed distribution cabinet may therefore be unnecessary for smaller temporary installations.
A portable exhibition distribution box can be positioned underneath a counter, inside a service area or near the booth's main electrical connection point, depending on the installation requirements.
The enclosure can be configured with different combinations of:
The exact configuration can be selected according to the exhibition's electrical supply and booth equipment.
Quick Setup and Removal
Exhibition electrical systems are often installed within a limited setup period before the show opens and removed immediately after the event.
For this type of application, the distribution equipment needs to support a straightforward installation process.
A portable distribution box can help simplify:
This makes it suitable for exhibition contractors, booth builders, event power companies and rental companies that handle multiple temporary installations.
Separate Circuits for Different Loads
For exhibition applications, separating different equipment into individual circuits can make power distribution easier to manage.
For example:
| Circuit | Typical Load |
|---|---|
| Circuit 1 | Booth Lighting |
| Circuit 2 | Display Screens |
| Circuit 3 | Computers |
| Circuit 4 | Audio Equipment |
| Circuit 5 | Product Demonstration Equipment |
| Circuit 6 | General-Purpose Outlets |
The actual number of circuits and protection arrangement should be determined according to the connected load and applicable electrical requirements.
Exhibition Power Distribution Box Configuration
APEKS can configure the distribution box according to the customer's project requirements.
Typical specification items include:
For international exhibition projects, the outlet and protection configuration can be designed according to the destination market and local electrical requirements.
For Contractors & Rental Companies
The product is not only intended for individual exhibition booths. It can also be used by companies that provide temporary electrical services for exhibitions and events.
Typical B2B customers include:
For rental fleets, different configurations can be developed for small booths, medium-sized displays and higher-load temporary installations.
Why Use a Dedicated Exhibition Distribution Box?
Using a dedicated distribution box can make temporary booth power more organized than connecting multiple extension cables directly to the venue supply. It provides a central point for:
Power Connection
Connect the booth to the available temporary electrical supply.
Circuit Distribution
Distribute incoming power to different booth circuits.
Circuit Protection
Provide appropriate protection for individual downstream circuits based on the selected configuration.
Equipment Connection
Connect lighting, displays, computers, audio equipment and other booth loads.
Temporary Deployment
Allow the system to be disconnected and transported after the exhibition.
Custom Exhibition Power Distribution Box Manufacturer
APEKS ELECTRIC CO., Ltd. manufactures portable power distribution boxes for temporary event, exhibition and construction applications. For exhibition projects, customers can provide the required:
Our team can then review the requirements and develop a suitable Exhibition Power Distribution Box configuration.
Request an Exhibition Power Distribution Box
Send us your booth power requirements, input supply, outlet list and quantity. We can help configure a portable distribution box for your exhibition, trade show or temporary event project.
Request a Quote →Hot Tags: exhibition power distribution box, China exhibition power distribution box manufacturers, suppliers, factory, event distribution boards, event power distribution box, Event Power Distro, power distribution box for live sound, temporary event power distribution
