This industrial power distribution box features an engineering plastic housing, designed for multi-device power distribution in construction sites, temporary work areas, and outdoor equipment testing environments.
The housing is a single-piece molded orange engineering plastic structure with an IP65 dust and water protection rating, suitable for use in humid and dusty outdoor environments.
The front panel features a three-layer industrial socket configuration: seven 230V single-phase industrial sockets on the top layer, five 400V three-phase industrial sockets in the middle layer, and four 400V high-current three-phase sockets on the bottom layer. All sockets are equipped with IP54 protective covers.
The enclosure supports wall mounting or direct placement. Internally, it can integrate branch circuit breakers for overload and short-circuit protection, providing multi-circuit branch power supply for a single main power input.
Key Specifications
Enclosure Material: Engineering Plastic
Protection Rating: IP65 (Enclosure) / IP54 (Sockets)
Voltage Rating: 230V / 400V
Socket Configuration: 7×230V Single-Phase, 9×400V Three-Phase
Installation Method: Wall-Mounted / Floor Placement
Application Scenarios: Construction Sites, Temporary Work Areas, Outdoor Equipment Testing
FAQ
1: What are the socket standards of this unit? Can they be customized to match local electrical codes?
The standard configuration uses IEC 60309 industrial sockets. We support customization to regional standards including:
Schuko (EU)
BS 1363 / BS EN 60309 (UK)
NEMA L5-15/L6-20 (North America)
AS/NZS 3112 (Australia/New Zealand)
Customization requires specifying voltage, current rating, and socket type at the time of order.
2: What certifications does this power distribution box carry? Can it meet local safety regulations?
Standard units are certified to CE (EN 60439-1, EN 60529) for EU markets. Additional certifications can be arranged based on target regions:
We provide full test reports and certification documents for customs clearance and on-site inspections.
3: What is the IP rating, and what does it mean for on-site use?
The enclosure is rated IP65, and the sockets are rated IP54. This means:
IP65 enclosure: Fully dust-tight, protected against low-pressure water jets from any direction.
IP54 sockets: Protected against dust ingress and splashing water.
It is suitable for outdoor construction sites, wet environments, and temporary events without additional weatherproofing.
Hot Tags: mobile power socket box, China mobile power socket box manufacturers, suppliers, factory
